International Symbols - Fluke 724 Calibration Manual

When servicing the Calibrator, use only specified replacement parts.
•
• To avoid false readings, which can lead to possible electric shock or personal
injury, replace the batteries as soon as the low battery indicator () appears.
To avoid possible damage to the Calibrator or to the test instruments:
Disconnect the power and discharge all high voltage capacitors before
•
testing resistance, diodes, or continuity.
Use the proper jacks, function, and range for each measurement or
•
sourcing application.

International Symbols

International symbols used on the Calibrator and in this manual are explained in Table 1.
Symbol

AC (Alternating Current)

DC (Direct Current)
AC or DC (Alternating or Direct

Current)

Pressure
Risk of Danger. Important

information. See Manual.
Hazardous voltage. Risk of electric

shock.
Conforms to relevant Australian

EMC standards
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the equipment types in the WEEE

Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go to
Fluke's website for recycling information.

Warnings (cont.)
Caution
Table 1. International Symbols
Meaning Symbol Meaning

Earth Terminal

ON/OFF

Conforms to European Union directives

Battery
Conforms to relevant North American

Safety Standards.

Double Insulated
Conforms to relevant South Korean EMC

Standards
Calibrators
International Symbols
3