Table of Contents
Advertisement
TG6611_6612CX(e).book Page 31 Thursday, March 31, 2011 5:04 PM
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode (page 31).
– Press {<} or {>} to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press ^ to erase the character or number highlighted by the cursor. Press and hold ^ to
erase all characters or numbers.
– Press * (A→a) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press {>} to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (F), Extended
1 (G), Extended 2 (H), and Cyrillic (I). When in these entry modes except Numeric, you
can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
/ s {r}: Select a character entry mode. s M
Note:
in the following tables represents a single space.
L
Alphabet character table (ABC)
Numeric entry table (0-9)
Greek character table (M)
Useful Information
31
Advertisement
Table of Contents
