Useful Information; Character Entry - Panasonic KX-TG6412E Operating Instructions Manual

TG6411-6421E(e).book Page 37 Tuesday, December 16, 2008 7:54 AM

Character entry

The dial keys are used to enter characters and numbers. Each dial key has multiple
characters assigned to it. The characters that can be entered depend on the
character entry mode (page 37).
– Press {^} or {V} to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press ^ to erase the character or number highlighted by the cursor. Press and
hold ^ to erase all characters or numbers.
– Press {*} to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press {V} to move the
cursor to the next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the
character is fixed and the cursor moves to the right.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek
(F), Extended 1 (G), Extended 2 (H), and Cyrillic (I). When in these entry
modes except Numeric, you can select which character is entered by pressing a dial
key repeatedly.
When the unit displays the character entry screen:
/ (right soft key) i {V}/{^}: Select a character entry mode. i M
Alphabet character table (ABC)
Numeric entry table (0-9)
Greek character table (M)
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Useful Information

37