Chapter 2: Cabling And Wiring; Overview; Selecting A Power Configuration; Local Power Configuration - Enterasys RoamAbout AP-2000 Hardware Installation Manual

Overview

This chapter presents detailed step-by-step procedures to select, configure, and install the
correct power, cabling, and wiring for your RoamAbout R2.

Selecting a Power Configuration

The power configurations available for the RoamAbout R2 include local power, remote
power, and redundant power.

Local Power Configuration

In the local power configuration, the RoamAbout R2 receives operating power directly
from one local source (such as a power supply connected to a nearby wall outlet). The
output plug of the power supply is connected directly into the RoamAbout R2
chassis-mounted power connector.
Caution: The Enterasys 5652054-xx International DC Power Supply (ships with the
RoamAbout R2) and the RBTR2-PS3 Redundant DC Power Supply have overload
protection. If an overload occurs because of miswiring or some other fault, the power
supply voltage folds back to help protect the power supply, the site wiring, and the
RoamAbout R2 from damage.
Precaución: La fuente de poder internacional de CC Enterasys 5652054-xx (se
distribuye junto con el RoamAbout R2) y la fuente de poder de CC de respaldo
RBTR2-PS3 disponen de un dispositivo de seguridad para sobrecargas. Si se produce
una sobrecarga debido a errores en el cableado o a cualquier otra falla, el suministro
eléctrico se reduce para prevenir que la fuente, el cableado de la instalación o el
RoamAbout R2 sufran daños.
RoamAbout R2 Wireless Access Platform Hardware Installation Guide 2-1
Cabling and Wiring
2