Cyberswitch 100 Hardware; Isdn Wan Connection; Pots Analog Telephone Connection; Cyberswitch 100 Software Support - Cabletron Systems CyberSWITCH CSX101 User's Information Manual

Advanced user information
Table of Contents

Advertisement

About the CyberSWITCH 100 Router

CyberSWITCH 100 Hardware

The CyberSWITCH 100 family (consisting of the CSX101, CSX103, CSX104, and CSX105)
provides one Ethernet port and one ISDN Basic Rate Interface (BRI) port (with built-in S/T, or U
interfaces). The CSX104 and CSX105 also support two analog device Plain Old Telephone
Service (POTS) ports. All models incorporate a built-in power supply. The CyberSWITCH 100
provides 10 Mbps Ethernet/IEEE 802.3 support through an 8-pin RJ45 10BASE-T jack on the rear
of the unit. The device supports an unlimited number of LAN users.

ISDN WAN Connection

The CyberSWITCH 100 provides one ISDN BRI port. ISDN allows fast dial setup and tear down
with high-speed data transfer rates. ISDN connectivity is through an 8-pin RJ45 S/T jack or U jack
on the rear of the unit.

POTS Analog Telephone Connection

The CSX104 and CSX105 provide two standard POTS (Plain Old Telephone Service) analog
device ports for connecting telephone, facsimile and analog modem equipment. Each port can be
used to connect multiple devices. The maximum length for each analog line is 100 feet (30
meters).

CyberSWITCH 100 Software Support

The CyberSWITCH 100 supports IEEE 802.1d bridging, TCP/IP routing, and IPX Routing as an
option. Wide Area Networking includes synchronous Point -to-Point Protocol in Single Link or
Multi-Link Protocol mode. Remote access is via ISDN Basic Rate Interface (BRI).
Enhanced bandwidth management techniques are employed to optimize data throughput and
minimize connect-time across dial-up WAN resources. Security features, including Pap and CHAP
authentication, are used to prevent unauthorized access to the network and data resources.
The software supports emulation of central office services to allow calls from/to analog devices on
each of the POTS interface ports. These lines support connection to local analog devices, Call
Progress tones, and DTMF.
This device supports industry-standard protocols, security features, compression algorithms and
network management tools to ensure interoperability with equipment from other vendors.
10 CyberSWITCH 100 Advanced User Information

Advertisement

Table of Contents
loading

Table of Contents