Table of Contents
Advertisement
1
ISDN Line Ordering and Configuration
This chapter provides ISDN BRI (Basic Rate Interface) line ordering and configuration
information. It contains the following sections:
•
Arranging ISDN Service
•
Telephone Switch Support
•
ISDN BRI Line Configuration
•
SPIDs, Directory Numbers and Telephone Numbers
•
Telephone Switch Parameters
Read the first section in this chapter for an overview of the steps required to order ISDN service
from your service provider (telephone company). The rest of the chapter details the information
that the service provider needs to give you, and which you need to give to the service provider.
Arranging ISDN Service
The service provider requires certain information about the capabilities of the CyberSWITCH 100.
You must give the service provider the required switch settings (parameters) for the provider's
central office switch. Consult with your service provider at least two months before you require the
installation and use of the ISDN service.
Complete the following steps to arrange your ISDN service:
1.
Contact the service provider and determine what type of ISDN central office switches are
available (see
Telephone Switch Support
2.
Supply the service provider with the provisioning information for their switch type to enable
proper configuration of the ISDN line (see
3.
Once the ISDN line is installed, ensure that the service provider supplies you with the following
information:
•
ISDN telephone numbers
•
ISDN Service Profile Identifier numbers (SPIDs) and/or Directory Numbers (DNs) (see
SPIDs, Directory Numbers and Telephone Numbers
in this chapter).
Telephone Switch Parameters
in this chapter)
CyberSWITCH 100 Advanced User Information
in this chapter).
1
Advertisement
Table of Contents
