Connecting The Collectors - Viessmann VITOSOL-F Installation Instructions For Contractors
Flat-plate collector for pitched roofs above roof installation with rafter hooks or mounting brackets
Hide thumbs
Also See for VITOSOL-F:
- Installation instructions manual (80 pages) ,
- Installation instructions for contractors (24 pages) ,
- Service instructions manual (24 pages)
Table of Contents
Advertisement
Connecting the collectors
Fig. 15
Fig. 16
Note
The collector temperature sensor is part of the stand-
ard delivery of the solar control unit.
Installation information
■
Lubricate O-ring seals only with the special valve
grease provided.
Initially tighten the union nut by hand, then tighten
■
with an open-ended spanner by a further
■
Never use annealed copper pipes with locking ring
fittings.
turn.
¾
15
Advertisement
Table of Contents
