Qos Commands - Encore ENMGS-24+4 User Manual

QoS Commands

Commands at QoS level:
QoS Configuration [<portlist>]
QoS Mode [<portlist>] [tag|port|diffserv]
QoS Port [<portlist>] [<class>]
QoS Tagprio [<portlist>] [<tagpriolist>] [<class>]
QoS DiffServ [<dscpno>] [<class>]
<class> range: low|normal|medium|high
QoS Configuration [<portlist>]
Description:
Show the configured QoS mode and the priority setting of all ports.
[<portlist>]: Port list (default: All ports).
QoS Mode [<portlist>] [tag|port|diffserv]
escription:
Set or show the QoS mode for the port.
[<portlist>] : Port list (default: All ports).
[tag|port|diffserv]: Enable tag, port or IP differentiated services
class of service for the port (default: Show mode).
QoS Port [<portlist>] [<class>]
Description:
Set or show the port class. In tag mode, the default class is used
for untagged frames. In port mode, the default class is used as the port
priority. In diffserv mode, the default class is used for non-IP frames.
[<portlist>]: Port list (default: All ports).
[<class>] : Internal class of service (default: Show default class).
QoS Tagprio [<portlist>] [<tagpriolist>] [<class>]
Description:
Set or show the VLAN user priority mapping.
[<portlist>] : Port list (default: All ports).
[<tagpriolist>]: VLAN user priority list, 0-7 (default: All user priorities).
[<class>] : Internal class of service (default: Show class).
41