EVGA Z590 DARK User Manual page 43

EVGA Z590 DARK (122-RL-E599)
24pin ATX Power (ATX_PWR_24P)
is the main power supply connector located along the lower-
ATX_PWR_24p
right edge of the board. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power
supply cable into the connector and make sure it is secure.
The Z590 DARK motherboard uses a right-angle 24pin ATX connector.
6-pin PCIe
The 6-pin PCIe connector present on the motherboard provides additional
power to the PCIe slots, rather than pulling it all from the 24-pin main power. It
is advised to plug in this connector when using SLI, especially with higher-end
graphic cards.
- 43 -