EVGA Z590 DARK User Manual page 11

EVGA Z590 DARK (122-RL-E599)
1.
M.2 Key-E Enabled
2.
Multi-function POST indicator
3.
Memory DIMM 2 Status
4.
Memory DIMM 1 Status
5.
+5V Standby Power
6.
CATERR
7.
VCORE Status
8.
VDDR Status
9.
VSA Status
10.
VCCIO Status
11.
VCCPLL Status
12.
VCCPLL_OC Status
1. M.2 Key-E Socket1 32mm
a. GREEN: M.2 can be used.
2. Multifunction POST Indicator
a. During boot it will cycle many different hexadecimal post codes with a
range of 00-FF and this indicates what aspect of the Power On Self Test
(POST) is currently running.
i. For a list of POST Codes, please see Page 160.
b. This indicator can be configured in BIOS to display hardware monitoring
information, such as voltage or temperature. After boot, these LEDs will
show either temperature or voltage, depending on user configuration in
the BIOS.
3. Memory DIMM 2 Status
a. OFF: DIMM detected and present
b. RED: DIMM/Memory has failed POST
4. Memory DIMM 1 Status
a. OFF: DIMM detected and present
b. RED: DIMM/Memory has failed POST
5. +5V Standby Power
a. WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
6. CATERR - Catastrophic Error on the processor
a. RED: Processor error has occurred.
b. OFF: No error state detected in the CPU.
LED Legend
13.
VCCST Status
14.
VCCSTG Status
15.
VCCIO_AUX Status
16.
Power Button
17.
Reset Button
18.
BIOS 1 Active
19.
BIOS 2 Active
20.
BIOS 3 Active
21.
SW Slow Mode ON
22.
PE1 Enabled
23.
PE1 Status
24.
M.2 Key-M PM1 Status
25.
M.2 Key-M PM1 Enabled
26.
U.2 PU1 Status
27.
U.2 PU1 Enabled
28.
M.2 Key-M PM2 Status
29.
M.2 Key-M PM2 Enabled
30.
M.2 Key-M PM3 Status
31.
M.2 Key-M PM3 Enabled
32.
PE2 Enabled
33.
PE2 Status
34
PE3 Enabled
35
PE3 Status
- 11 -