Empire Comfort Systems DVLXB55BP90N-1 Installer's Manual page 60

Serial Number
The serial number is located on the date plate beneath the
engine of the fireplace.
Removing the Control Tray
With the glass, infill, and burners removed, remove the eight
screws from the control tray, shaded gray below. Lift the
control tray partway out of the fireplace and rest it on the
base. Then disconnect the gas and electrical connections to
allow the control tray to be removed entirely.
Removing the Fan Trays
With the glass, infill, and burners removed, remove the six
screws from the fan tray, shaded gray below. Lift the fan tray
partway out of the fireplace and rest it on the base. Then
disconnect the electrical connections to allow the fan tray to
be removed entirely.
Replacing the Fan Thermal Cut Out (TCO 60°C/140
With the glass, infill, burners and left hand fan removed,
remove the two screws holding the TCO in place. Disconnect
the electrical connections to allow the part to be removed.
60
MAINTENANCE AND SERVICE
Replacing the Pressure Switch or Exhaust Thermal Cut Out
(TCO 140°C/284
With the glass, infill, and burners removed, remove the three
screws from the panel shown in the diagram below. Carefully
remove the panel from the firebox.
Remove the 12 screws from the access hatch shown below and
carefully remove it from the firebox.
F)
o
Reach in through the access hatch to access both the pressure
switch and the Exhaust TCO (140°C/284
F)
o
F), as shown below.
o