Table of Contents
Advertisement
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select the i Algodón/Algodão
2.
(Cottons) (activate SpeedPerfect
setting) programme.
If your appliance with
Note:
intelligent dosing system
need to deactivate the intelligent
dosing system.
Select the Inicio/Pausa + Carga
3.
(Start/Reload) button. Allow the
programme to run for approx. 40
seconds.
Turn the programme selector to
4.
Û (Off).
Pull out the mains plug.
5.
Clean the filters:
Disconnect the hose from the rear of
1.
the appliance.
Use pliers to remove the filter.
2.
*
Depending on the module
3.
*
, you also
4.
Cleaning and maintenance
Clean the filter with a small brush.
Connect the hose and check for
leaks.
en
45
Advertisement
Table of Contents
