Table of Contents
Advertisement
Cleaning and maintenance
en
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select the Cottons (activate Speed
2.
setting) programme.
Select the A button. Allow the
3.
programme to run for approx. 40
seconds.
Press the button #.
4.
Pull out the mains plug.
5.
Clean the filters:
Disconnect the hose from the rear of
1.
the appliance.
Use pliers to remove the filter.
2.
44
Clean the filter with a small brush.
3.
Connect the hose and check for
4.
leaks.
Advertisement
Table of Contents
