Panasonic KX-TVP120C Subscriber's Manual page 69

System Report
The System Administrator or System Manager can generate 8 System Reports to monitor the
VPS operating status as required.
System Security
By default, the System/Message Managers cannot access the VPS from their telephones until
the System Administrator enables the relevant settings and sets a password for access. The
System/Message Managers always need to enter this password to access the VPS.
The System Administrator can also choose to set a default password for subscribers'
mailboxes. If this setting is enabled, a default password is automatically assigned when
mailboxes are created.
TIME
One of the utility commands that is used to confirm or set the time and date of the VPS.
Time and Date Stamp Position
Specifies the position of Time and Date Stamp.
Before: The VPS announces Time and Date Stamp before playing the recorded/transferred
message.
After: The VPS announces Time and Date Stamp after playing the recorded message.
None: The VPS does not announce Time and Date Stamp.
Time Group
A time frame in which Day, Night, Lunch, or Break time period can be programmed. It is
possible to assign up to 8 different Time Groups.
Time Synchronization
(Available with DPT Integration only.) When the PBX sets a new date and time or when DPT
Integration is established, the data is sent from the PBX to the VPS.
Toll Saver
Is a cost-saving feature that allows a subscriber to check her mailbox from a pre-assigned DID/
Caller ID number without necessarily making the VPS answer the call. Without Toll Saver, the
VPS will always answer the call and therefore she will incur toll charges. With Toll Saver, the
VPS can let her know that there are no new messages without answering her call.
Two-Way Recording (TWR)
(Available with DPT Integration only.) Allows a subscriber to record a conversation into her
mailbox.
Two-Way Transfer (TWT)
(Available with DPT Integration only.) Allows a subscriber to record a conversation into another
person's mailbox.
Subscriber's Guide 69