Table of Contents
Advertisement
4.15 Setting Telephone Numbers for Call
Forwarding to CO
This feature allows you to assign Telephone number 1 and Telephone number 2 as the
destination to which the callers are forwarded if you set Remote Call Forwarding to a CO line
(see 4.16 Remote Call Forwarding Set).
•
This feature is available to you only if you are using a Panasonic KX-TD/KX-TDA
series telephone system with DPT Integration (see "DPT Integration" in the Glossary).
•
If you cannot use this feature, ask your System Administrator or System Manager.
She might have disabled it.
Subscriber's
Main Menu
Log into your
mailbox.
FOR THE FIRST TIME
Telephone No.
Enter the destination
telephone number and wait.
2
Press 2
to accept.
•
Depending on your telephone system, you can enter up to 24 or 16 digits using the
keys 0-9 and
•
Please make sure you begin the telephone number with a Line Access Code (to seize
a CO line).
•
Note about telephone number assignment and call forwarding setting:
The Remote Call Forward to CO feature only allows you to assign Telephone number
1 and/or Telephone number 2; to enable call forwarding to the telephone number you
have assigned above, follow the instructions in 4.16 Remote Call Forwarding Set.
•
If you should change the telephone number after you have enabled call forwarding to
a CO line, you must go back to 4.16 Remote Call Forwarding Set to reset the call
forwarding setting; otherwise, you will be transferring calls to the old telephone
number unknowingly.
4.15 Setting Telephone Numbers for Call Forwarding to CO
5
6
Press 5.
Press 6.
WHEN YOU WANT TO CHANGE THE TELEPHONE NUMBER
or
1
Press 1
to change.
On-hook.
for telephone numbers.
To change Telephone number 1
1
2
To change Telephone number 2
Make your selection.
New Telephone No.
Enter the new destination
telephone number and wait.
Subscriber's Guide
49
Advertisement
Table of Contents
