us_main.book.book Page 35 Monday, October 18, 2021 10:34 AM
4
To reinstall, slide the filter in on the back side
and push it upward to secure it.
NOTE
• Do not operate the hood without the filters in
place.
Replacing Parts
Unplug the power cord and put on gloves before
replacing parts.
Replacing the Charcoal Filter
1
Unplug the power cord and wear gloves.
2
Remove the vent grille screw. Open the oven
door, hold both sides of the vent grille and
remove it.
3
Remove the old charcoal filter.
4
Slide a new charcoal filter into place. The filter
should rest at the angle shown.
5
Slide the bottom of the vent cover into place.
Push the top until it snaps into place. Tighten
the vent grille screw in place.
6
Close the oven door, plug in the power cord.
MAINTENANCE
35