Avocent AutoView 1000R Installer/User Manual page 50

44
AutoView 1000R/AutoView 2000R Installer/User Guide
7. From the main menu, type 2 to select Firmware Management. The current
version of your firmware displays in the Firmware Management screen.
8. From the Firmware Management menu, type 1 to select FLASH Download.
9. Type the IP address of the TFTP server and press Enter.
10. Type the name of the FLASH file and press Enter.
11. Confirm the TFTP download by typing y or yes and pressing Enter.
12. The AutoView 1000R/2000R will verify the file you downloaded is valid.
Next you will be prompted to confirm the upgrade. Type y or yes and Enter.
13. The AutoView 1000R/2000R will begin the FLASH upgrade process. On-screen
indicators will display the upgrade process. When the upload is complete, the
AutoView 1000R/2000R will reset and upgrade the internal subsystems.
CAUTION: Do not cycle power to the AutoView 1000R/2000R during this process. A loss of
power might render the appliance inoperable and require the unit be returned to the factory for
repair. This upgrade may take up to 10 minutes to complete.
14. Once the upgrade is complete, the startup message from step 4 will appear
on the terminal screen.
Upgrading the AVRIQ firmware
The AVRIQs can be upgraded individually or simultaneously.
To simultaneously upgrade multiple AVRIQs:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - AVRIQ Status. The AVRIQ Status dialog box appears.
Figure A.1: AVRIQ Status Dialog Box
3. Click one or more types of adaptors to upgrade. Click Upgrade.