Resetting Your Keyboard And Mouse; Displaying Version Information - Avocent AutoView 1000R Installer/User Manual

Figure 3.11: User Status Dialog Box
4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press Escape to exit the dialog box without disconnecting a user.
NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will
turn into an hourglass as the list is automatically updated. No mouse or keyboard input will be
accepted until the list update is complete.

Resetting Your Keyboard and Mouse

If your keyboard or mouse locks up, you may be able to re-establish operation
of these peripherals by issuing a reset command. The reset command sends a
key sequence to the server which causes the mouse and keyboard settings to
be sent to the appliance. With communication re-established between the
server and the appliance, functionality is restored to the user.
To reset the mouse and keyboard values:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - Reset PS/2. A message box displays indicating that the
mouse and keyboard have been reset.
3. Click X to close the message box.

Displaying Version Information

OSCAR enables you to display the AutoView 1000R/2000R and AVRIQ
firmware versions. For optimum performance, keep your firmware current.
For more information, see Appendix A.
To display version information:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - Display Versions. The Version dialog box appears. The
top half of the box lists the subsystem versions in the appliance.
Chapter 3: Analog Port Operation
Figure 3.12: Disconnect Dialog Box
31