Avocent AutoView 1000R Installer/User Manual page 29

Figure 3.2: Setup Dialog Box
Assigning server names
Use the Names dialog box to identify individual servers by name rather than by
port number. The Names list is always sorted by port order. Names are stored in
the AVRIQ, so even if you move the cable/server to another ARI port, the name
and configuration will be recognized by the appliance.
NOTE: If a server is turned off, its respective AVRIQ will not appear in the Names list.
To access the Names dialog box:
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup - Names. The Names dialog box appears.
Figure 3.3: Names Dialog Box
NOTE: If the server list changes, the mouse cursor will turn into an hourglass as the list is
automatically updated. No mouse or keyboard input will be accepted until the list update is complete.
To assign names to servers:
1. In the Names dialog box, select a server name or port number and click
Modify. The Name Modify dialog box appears.
Chapter 3: Analog Port Operation
23