Post Codes - EVGA Z590 FTW WIFI User Manual

EVGA Z590 FTW WIFI (121-RL-E597)

POST Codes

This section provides the AMI POST Codes for the
EVGA Z590 FTW WIFI Motherboard during system
boot up. The POST Codes are displayed on the
Debug LED readout located directly on the
motherboard.
See Page 11 and 12, component 21 of the
Component Legend for physical location.
This Debug LED will switch to display the user's
80Port Configuration settings after POST (see Page 152). Please note that if you
see the Debug LED constantly switching numbers after entering Windows, the
Debug LED is showing temperature or voltage information, and is NOT
reporting errors.
AMI POST Codes
1 Power on. Reset type detection (soft/hard).
2 AP initialization before microcode loading
3 North Bridge initialization before microcode loading
4 South Bridge initialization before microcode loading
5 OEM initialization before microcode loading
6 Microcode loading
7 AP initialization after microcode loading
8 North Bridge initialization after microcode loading
9 South Bridge initialization after microcode loading
0A OEM initialization after microcode loading
0B Cache initialization
0C-0D Reserved for future AMI SEC error codes
0E Microcode not found
Debug LED with CPU
Temperature Monitor
- 155 -