EVGA Z590 FTW WIFI User Manual page 10

EVGA Z590 FTW WIFI (121-RL-E597)
1. Power / Reset Buttons
a. Power Button
i. RED: Motherboard is turned on and running
b. Reset Button
i. White: Reset button will typically flash in conjunction with
ii. NVMe SSDs cannot be read for the purposes of the Reset LED.
2. Multifunction POST Indicator
a. During boot it will cycle many different hexadecimal post codes with a
range of 00-FF and this indicates what aspect of the Power On Self Test
(POST) is currently running.
i. For a list of POST Codes, please see Page 155.
ii. After boot, these LEDs will show the current CPU temperature,
3. +5VSB
a. White: Voltage present (Does not mean PSU is outputting in-spec, only
that this specific voltage is detected)
4. CATERR_LED - Catastrophic Error on the processor
a. RED: Processor error has occurred.
b. OFF: No error state detected in the CPU.
5. Onboard ARGB LED
a. Located on the I/O cover, the LEDs can be directly controlled via
EVGA ELEET X1. Choose the LED colors and patterns, or turn off in
the software.
6. Active BIOS LED
a. BIOS 1
i. WHITE: BIOS 1 chip is active
ii. OFF: BIOS 2 chip is active
b. BIOS 2
i. WHITE: BIOS 2 chip is active
ii. OFF: BIOS 1 chip is active
HDD/SSD LED. Depending on load, the button may flash or
appear solid white at times.
or your choice of temperatures after configuration in the
motherboard BIOS. See Page 152 for more information.
- 10 -