EVGA Z590 FTW WIFI User Manual page 82

EVGA Z590 FTW WIFI (121-RL-E597)
Repairing an array within IRST
This section of the guide will illustrate how to repair a degraded array from within the
IRST. For purposes of this guide, we are repairing a degraded RAID1 array using a third
drive plugged into the controller, but not currently in use.
Below, you can see a degraded array, and one of its drives reported as missing/failed.
The data on the other drive is still intact, but the fault tolerance is offline due to the
missing/failed drive. The IRST also shows several warnings, the "!" for "Status", "!" for
the portion of the array missing (showing the degradation of the logical drive), and the
"!" for the physical drive, which also states 0GB – a further indicator of a faulty drive.
You can repair the array from here or from the Manage tab at the top of IRST.
- 82 -