Firmware Updates; System Gain; Certifications - Shure AXT100 User Manual

Firmware Updates

Firmware is embedded software used to control features and the user interface. Periodically, new versions of firmware are
available for download from www.shure.com/wwb to incorporate additional features and enhancements. New versions of the
firmware can be downloaded to AXT400 Receiver using the Firmware Update Manager tool available in WWB6 software and
installed on the transmitter using the infrared ports on the transmitter and receiver.
To access the AXT400 receiver firmware update menu: Tx > IR Presets > FW Update

System Gain

In an audio system containing both AXT400 and UR4 receivers, the overall system audio gain at the XLR (line) output varies
depending on the receiver model and the type of transmitter.
The table below offers a comparison of the output gain at the XLR output for AXT400 and UR4 receivers for each transmitter
model. Use the information in the table to achieve consistent gain levels when using systems comprised of both Axient series
and UR series components.
System gain from transmitter input to receiver XLR output (line) when transmitter gain = 0 dB
Transmitter
Receiver AXT400
gain setting =
UR4
0 dB

Certifications

Meets essential requirements of the following European Directives:
• R&TTE Directive 99/5/EC
• WEEE Directive 2012/19/EU, as amended by 2008/34/EC
Top view of bodypack
AXT100 Body- AXT200 Hand-
pack held
gain = 0 dB gain = 0 dB
+10 dB gain +15 dB gain
N/A N/A
UR1 Body- UR1M Body-
pack pack
gain = 0 dB gain = 0 dB
sens = 0 dB sens = 0 dB
+15 dB gain +15 dB gain
+18 dB gain +18 dB gain
Shure Incorporated
UR2 Handheld
gain = 0 dB
+15 dB gain
+18 dB gain
16/18