Setting The Clock; Alarm Operation - Jensen JCR-390 User Manual

The LED DISPLAY (#1) will flash when the unit is plugged in for the first time. The unit is now
in standby mode.
Setting the Time:
1. In standby mode, press and hold the TIME SET
until the hour digits of the clock display begin to flash.
2. Repeatedly tap the SKIP
BUTTON (#23) to set the hour. Press and hold the buttons for
fast reverse/advance setting. Make sure the correct AM or PM
time is selected when setting the hour.
Note: The PM INDICATOR (#9) is located in the right part of the LED DISPLAY (#1).
The PM INDICATOR (#9) will light when the hour digits selected are for PM time. The PM
INDICATOR (#9) will be off when the hour digits selected are for AM time.
3. Press the TIME SET
minute digits will flash.
4. Repeatedly tap the SKIP
BUTTON (#23) to set the minute. Press and hold the buttons for
fast reverse/advance setting.
5. Tap the TIME SET
stop flashing.
Checking the time:
Press and hold the
modes and the current time will show on the LED DISPLAY (#1) for 5 seconds. The previous
display will automatically return once the 5 seconds expires.
The unit features a dual alarm clock.
Setting the alarms:
1. In standby mode, press and hold the ALARM 1 BUTTON (#17), The ALARM 1
INDICATOR (#12) and the hour of the alarm time will flash.
2. Tap the SKIP
hold the buttons for fast advance/reverse setting.
Note: Make sure the correct AM or PM time is selected when setting the hour.
3. Tap the ALARM 1 BUTTON (#17) to confirm the hour setting, the minute digits will flash to
prompt for input.
4. Tap the SKIP
hold the button for fast reverse/advance setting.
5. Tap the ALARM 1 BUTTON (#17) to confirm the minute setting. The wake up option will
now show on the LED DISPLAY (#1) to prompt for input.
6. Tap the SKIP
(Cd-CD, bU-ALARM, rAd-FM or rAd-AM).
7. Tap the ALARM 1 BUTTON (#17) to confirm and complete the ALARM 1 setting.

SETTING THE CLOCK

BUTTON (#22) or SKIP
BUTTON (#25)
BUTTON (#22) or SKIP
BUTTON (#25)
TIME SET BUTTON (#25) 2 seconds when the unit is in CD, FM or AM

ALARM OPERATION

BUTTON (#23) or SKIP
BUTTON (#23) or SKIP
BUTTON (#23) or SKIP
BUTTON (#25)
to confirm the time and the
to confirm and complete the setting. The display will
BUTTON (#22) to set the hour. Press and
BUTTON (#22) to set the minute. Press and
BUTTON (#22) to select the wake up option
E-8