Clock Setting; Timer Setting - Jensen SMPS-628 User Manual

1. In standby mode, press and hold the MEM / CLK BUTTON (#5). The "12H" will
blink.
2. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the
12Hour or 24Hour format.
3. Press the MEM / CLK BUTTON (#5) to confirm. The hour digits will blink.
4. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the
current hour.
5. Press the MEM / CLK BUTTON (#5) to confirm. The minute digits will blink.
6. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to set the
current minute.
7. Press the MEM / CLK button to confirm and the Clock Setting is completed.
NOTE:
1. The clock settings may be lost if the adaptor is unplugged and the battery drains
after a period of time. If this occurs, you will need to reset the clock.
2. The PM ICON (#15) will light when the 12hour format is selected
In any mode, press the TIMER BUTTON (#4), the TIMER INDICATOR (#16) with time
"180" will show on the LCD Display and flash.
1. Press the TIMER BUTTON (#4) repeatedly to adjust the timer in decrements of 10
minutes.
2. Press the TUN+ / SKIP+ BUTTON (#8) or TUN- / SKIP- BUTTON (#7) to adjust the
timer in increments / decrements of 1 minute.
3. After the set time is reached, the SMPS-628 alarm will sound.
4. When the alarm sounds, press the

CLOCK SETTING

TIMER SETTING

STANDBY BUTTON to stop the alarm.
E-6