Table of Contents
Advertisement
GPU kit
The GPU FL and HL kits are available for the Customer. Depending on the kit ordered, the respective components will be
available.
CAUTION:
Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
WARNING:
Consumer-Grade GPUs should not be installed or used in the Enterprise Server products.
Table 51. Components in the full length (FL) GPU kit
Components
Risers
Shroud
Fans
Heat sinks
Cables
Foam
FL - Full Length, HL - Half Length, HPR - High Performance, SLVR - Silver
#
NOTE:
The Riser R3B is shipped with the GPU FL kit, however riser R3B does not support GPU.
NOTE:
¹ The configuration 3-1 supports GPU only on slots 2 and 7.
Table 52. Components in the half length (HL)GPU kit
Components
Risers
Shroud
Fans
Heat sinks
Cables
Foam
HL - Half Length, HPR - High Performance, SLVR - Silver
NOTE:
* Refer to
expansion card installation guidelines
system.
166
Upgrade Kits
GPU FL GOLD kit
Details
Riser configuration 2-1,
3-1¹,or 4-1
GPU shroud
GOLD HPR
T-type heat sink
for processor 1 and
processor 2
Power cable
Mylar foam
GPU HL GOLD kit
Details
Riser configuration 1,
2-2, or 4-2
GPU shroud
GOLD HPR
T-type heat sink
for processor 1 and
processor 2
N/A
Mylar foam
Quantity
3 x FL risers (R1A or
R1C, R4A) + 3 x HL
risers (R2A, R3A or
#
R3B
)
1
6
2
2x (6+2)-pin power
cables, 2 x 8-pin power
cables
1
Quantity
8 x HL risers (R1A or
R1B or R1C, R2A, R3A
or R3B, R4A or R4B)
1
6
2
0
1
for more information on riser configuration supported for the
GPU FL SLVR kit
Details
Riser configuration 2-1,
3-1¹, or 4-1
GPU shroud
SLVR HPR
T-type heat sink
for processor 1 and
processor 2
Power cable
Mylar foam
GPU HL SLVR kit
Details
Riser configuration 1,
2-2, or 4-2
GPU shroud
SLVR HPR
T-type heat sink
for processor 1 and
processor 2
N/A
Mylar foam
Quantity
3 x FL risers (R1A or
R1C, R4A) + 3x HL
risers (R2A, R3A or
#
R3B
)
1
6
2
2x (6+2)-pin power
cables, 2 x 8-pin power
cables
1
Quantity
8 x HL risers (R1A or
R1B or R1C, R2A, R3A
or R3B, R4A or R4B)
1
6
2
0
1
Advertisement
Table of Contents
