Power Management Setup - MSI 645E Max-U Manual

S1/POS
S3/STR
Auto
Initialize VGA BIOS By S3
This item allows the system to initialize the VGA BIOS if S3 (Suspend to RAM)
resumes. Settings: Enabled and Disabled.
Power Management
When Disabled, SMI will not be initialized, and complete power management
functionality is removed until this option is set to Enabled. Settings are
Disabled and Enabled.
Suspend Time Out
After the selected period of system inactivity, all devices except the CPU shut
off. Settings are Disabled, 1, 2, 3, 4, 5, 10, 15, 20, 30 (min).
Hard Disk Time Out
If HDD activity is not detected for the length of time specified in this field, the
hard disk drive will be powered down while all other devices remain active.
Settings are Disabled, 1 through 15 Min.
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settings are:
Power Off
Power On
Last State
The S1 sleep mode is a low power state. In this state, no
system context is lost (CPU or chipset) and hardware
maintains all system context.
The S3 sleep mode is a lower power state where the infor-
mation of system cofiguration and open applications/
files is saved to main memory that remains powered while
most other hardware components turn off to save energy.
The information stored in memory will be used to restore
the system when an "wake up" event occurs.
The system will decide when to enter S1 or S3 state.
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the status before power failure or
interrupt occurs.
3-15
AMI BIOS Setup
®