Vivax M-DESIGN R32 User Manual page 202

VIVAX
Indicator lamps
continue flashing
Error code appears in
the window display
of indoor unit:
• E0, E1, E2...
• P1, P2, P3...
• F1, F2, F3...
NOTE: If your problem persists after performing the checks and
diagnostics above, turn off your unit immediately and contact
an authorized service center.
5. European Disposal Guidelines
This appliance contains refrigerant and other potentially hazardous
materials. When disposing of this appliance, the law requires special
collection and treatment. Do not dispose of this product as household
waste or unsorted municipal waste.
When disposing of this appliance, you have the following options:

Dispose of the appliance at designated municipal electronic waste
collection facility.

When buying a new appliance, the retailer will take back the old
appliance free of charge.

The manufacturer will take back the old appliance free of charge.

Sell the appliance to certified scrap metal dealers.
The unit may stop operation or continue to run
safely. If the indicator lamps continue to flash or
error codes appear, wait for about 10 minutes. The
problem may resolve itself.
If not, disconnect the power, then connect it again.
Turn the unit on.
If the problem persists, disconnect the power and
contact your nearest customer service center.
ENG