Vivax M-DESIGN R32 User Manual page 187

VIVAX
ENG
To reset the reminder, press the LED button on your remote control 4
times, or press the MANUAL CONTROL botton 3 times. If you don't reset
the reminder, the "nF", "run" & "timer" indicator lamps will flash again
when you restart the unit.
For a detailed explanation of your unit's advanced functionality (such as
TURBO mode and its self-cleaning functions), refer to the Remote
Control Manual.
NOTE ON ILLUSTRATIONS
Illustrations in this manual are for explanatory purposes. The actual
shape of your indoor unit may be slightly different. The actual shape shall
il.
preva
Setting Angle of Air Flow
Setting vertical angle of air flow
While the unit is on, use the SWING/ DIRECT button to set the direction
(vertical angle) of airflow.
1.Press the SWING/ DIRECT button once to activate the louver. Each time
you press the button, it will adjust the louver by 6°. Press the button until
the direction you prefer is reached.
2.To make the louver swing up and down continuously, press and hold
the SWING/ DIRECT button for 3 seconds. Press it again to stop the
automatic function.
Caution: Do not keep louver at too vertical an angle for long periods of
time. This can cause water condensation to drip on your furnishings.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set manually. Grip the
deflector rod (See Fig.B) and manually adjust it to your preferred
can be set
direction. For some units, the horizontal angle of the airflow
by remote control. Please refer to the Remote Control Manual.