Overview; Tools; Jigs; Making The Spring Hook Jig - Epson L351 Service Manual

L350/L300/L355/L210/L110 Series

2.1 Overview

In this chapter, the product names are called as follows:
L350 Series: L350/L351
L300 Series: L300/L301
L355 Series: L355/L358
L210 Series: L210/L211
L110 Series: L110/L111
This chapter describes procedures for disassembling the main parts/units of this product. Unless otherwise
specified, disassembled parts/units can be reassembled by reversing the disassembly procedure. See the cautions
or tips for disassembly/reassembly described in
Unit (p40)".
Read the "Safety Precautions(p3)"
When you have to remove units or parts that are not described in this chapter, see the exploded diagrams of SPI
(Service Parts Information).

2.1.1 Tools

Use only specified tools to avoid damaging the printer.
(+) Phillips screwdriver #1
(+) Phillips screwdriver #2
Flathead screwdriver
Flathead Precision screwdriver #1
Tweezers
Longnose pliers
Acetate tape
Note 1: Some of the tools listed above are commercially available.
2: EPSON provides the tools listed with EPSON part code.

2.1.2 Jigs

Name
Spring hook jig*
Thickness gauge (1.5 mm)
Thickness gauge (2.0 mm)
Sonic tension meter
Note *: If performing the disassembling/reassembling procedure is difficult using tweezers such as when reassembling
Assy (p43)", the spring hook jig helps you to remove/attach the spring easier.

2.1.2.1 Making the Spring Hook Jig

Fold a clip (commercial item) as shown in
Before folding
Disassembly/Reassembly
before disassembling and reassembling.
Name
Quantity
1 Can be made with a commercial item
2
2
1
Fig. 2-1.
Fold here
Clip
Figure 2-1. Making the Spring Hook Jig
"2.3 Detailed Disassembly/Reassembly Procedure for each Part/
Availability
O
O
O
O
O
O
---
EPSON Part Code
Commercially available
Commercially available
After folding
Fold appropriate length
to hitch a spring.
Overview
EPSON Part Code
1080530
---
---
---
---
---
1003963
See " Making the Spring Hook Jig (p17)".
1294120
" Cap Lever/Cap
40 mm or more
Clip
Revision B
17
Confidential