Lubrication Points And Instructions - Epson L351 Service Manual

L350/L300/L355/L210/L110 Series

4.2 Lubrication Points and Instructions

Figure 4-1. Lubrication of the Frame Base (1)
Frame Base
Apply grease inside the rail section.
Figure 4-2. Lubrication of the Frame Base (2)
Maintenance
<Part supply as ASP>
None
<Lubrication status when
supplied as ASP>
---
<Lubrication Point>
Ribs (x12) and hooks (x6)
on the Frame Base
(Contact points of the EJ
Roller)
<Type>
G-74
<Application Amount>
Appropriate amount
<Remarks>
Apply with flux
dispenser.
Frame Base
Stir G-74 before use.
Application Point
<Part supply as ASP>
None
<Lubrication status when
supplied as ASP>
---
<Lubrication Point>
Contact points (x2) on the
Frame Base with the Panel
Assy
<Type>
G-74
<Application Amount>
Application Point
Appropriate amount
<Remarks>
Apply grease inside the rail section.
Apply with flux
dispenser.
Stir G-74 before use.
Lubrication Points and Instructions
Apply grease on sides.
Bottom
Apply grease on ribs
Apply grease on ribs
Apply grease on both sides of dowels
Figure 4-3. Lubrication of the Frame Base (3)
Revision B
<Part supply as ASP>
None
<Lubrication status when
supplied as ASP>
---
<Lubrication Point>
1.Contact points (x2) on
the Frame Base with the
Hopper
2. Contact points (x7) on
the Frame Base with the
Stacker Assy
<Type>
1. G-71
2. G-74
<Application Amount>
Appropriate amount
<Remarks>
Apply with flux
Frame Base
dispenser.
Stir G-74 before use.
1. Application Point
2. Application Point
Apply grease on ribs
66
Confidential