Advertisement
Volvo 1990 740 Model
2 (intermediate position)
Upshifts and downshifts of first two gears (low and intermediate) occur automatically. No upshift to 3rd
or 4th gear occurs. Position 2 may be used to obtain forced downshift to 2nd gear for increased engine
braking effect.
1 (low position)
If position 1 is selected when driving at high speeds, 2 is engaged first and 1 when the speed has
dropped to approx. 30 mph (50 km/h). No upshift can occur once 1 is engaged. Use position 1 to select
low gear when no upshift is desired, for instance, when entering and descending steep grades.
The gear selector can be moved freely between D and 2. Selections of other positions are obtained by
depressing the selector knob prior to moving the selector.
Slightly depressing the selector knob allows selection of positions N, D, 2 and 1.
Fully depressing the selector knob allows selection of positions R and P. This is also necessary when
initially bringing the selector out of position P.
Fully depressing the selector knob thus permits shifting freely between all positions.
file:///K|/ownersdocs/1990/1990_740/90740_11.htm (4 of 6)12/30/2006 8:25:57 AM
Shift gate
Advertisement
