Advertisement
7. Use two supplied Small Screws to lock the camera base and the mounting plate.
8. Optionally insert a micro SD card into the card slot (please refer to 2. Physical
Description).
9. Remove the screw to adjust the pan / tilt / rotate angles of the lens.
10. Before screwing back the camera cover, remove the 2 old desiccant bags from the inside
of Camera Cover and replace them with the supplied Desiccant Bag. Screw the camera
cover back to the camera.
Remove the 2 desiccant bags
Note: Please screw back the
Camera Cover immediately
in case of reducing the
absorption capacity of the
desiccant bag inside the
camera body.
6
Advertisement
