Advertisement
a. Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through
the supplied Waterproof Ring, Cable Gland, Stopper and Screw Cap accordingly.
Waterproof Ring
b. Connect the RJ-45 cable to the LAN/PoE Cable of the camera.
LAN/PoE Cable
c. Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45 Connector Cable.
Cable Gland
d. Crimp the RJ-45 connector onto the RJ-45 network cable. Note that the wires should
be placed into the RJ-45 connector based on the following order (from left to right).
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
6. Remove the four screws of the upper cover through the supplied Hexagon Wrench.
Stopper
Cable Gland
RJ-45 Cable
Screw Cap
Screw Cap
5
Advertisement
