Advertisement
2. Check that the holes of the Mounting Sticker are correct.
3. There are two ways to tread the cables:
a. Through the wall / ceiling: run the cables through the hole on the wall / ceiling.
Wall / Ceiling
b. The other way is to cut the side of the mounting plate and fix the wire on it, the
placement can be arbitrarily placed on the top, bottom, left and right according to the
installation situation.
4. Connect the camera to power. You can either connect the camera to a 12VDC power
source or to a PoE switch using the PoE cable.
5. Connect the camera to the network using the supplied Cable Gland Kit.
Wall / Ceiling
4
Advertisement
