Table of Contents
Advertisement
TRANSMITTER PROGRAMMING
Note: The system is capable of learning up to 3 different transmitter codes.
Note: The system is capable of learning up to 3 different transmitter codes.
Note: The system is capable of learning up to 3 different transmitter codes.
All Transmitters to be programmed MUST be programmed at the same time, or
All Transmitters to be programmed MUST be programmed at the same time, or
All Transmitters to be programmed MUST be programmed at the same time, or
previous transmitters will be erased from memory.
previous transmitters will be erased from memory.
previous transmitters will be erased from memory.
To place the system in Transmitter Code Learning Mode:
To place the system in Transmitter Code Learning Mode:
To place the system in Transmitter Code Learning Mode:
1. Open the hood.
1. Open the hood.
1. Open the hood.
2. Start with ignition key in the "Off" position, turn the ignition key "On/Off", "On/Off",
2. Start with ignition key in the "Off" position, turn the ignition key "On/Off", "On/Off",
2. Start with ignition key in the "Off" position, turn the ignition key "On/Off", "On/Off",
"On" and leave in the "On" position.
"On" and leave in the "On" position.
"On" and leave in the "On" position.
3. Press and hold the brake down for 5 seconds until lights flash 5 times and the LED
3. Press and hold the brake down for 5 seconds until lights flash 5 times and the LED
3. Press and hold the brake down for 5 seconds until lights flash 5 times and the LED
comes "ON" solid.
comes "ON" solid.
comes "ON" solid.
The system is now in Programming Mode and is ready to accept transmitter
The system is now in Programming Mode and is ready to accept transmitter
The system is now in Programming Mode and is ready to accept transmitter
programming.
programming.
programming.
To program new Transmitters:
To program new Transmitters:
To program new Transmitters:
Press button #1 of each transmitter once momentarily - the system will respond with 1
Press button #1 of each transmitter once momentarily - the system will respond with 1
Press button #1 of each transmitter once momentarily - the system will respond with 1
light flash ans the LED will turn "Off" momentarily to confirm that it has accepted the
light flash ans the LED will turn "Off" momentarily to confirm that it has accepted the
light flash ans the LED will turn "Off" momentarily to confirm that it has accepted the
new code.
new code.
new code.
To exit Transmitter Code Learning Mode:
To exit Transmitter Code Learning Mode:
To exit Transmitter Code Learning Mode:
The system will automatically exit Programming Mode for any of the following conditions:
The system will automatically exit Programming Mode for any of the following conditions:
The system will automatically exit Programming Mode for any of the following conditions:
1. The ignition is turned "Off".
1. The ignition is turned "Off".
1. The ignition is turned "Off".
2. No new transmitter button has been pressed within 5 seconds.
2. No new transmitter button has been pressed within 5 seconds.
2. No new transmitter button has been pressed within 5 seconds.
3. After the 3rd transmitter has been programmed.
3. After the 3rd transmitter has been programmed.
3. After the 3rd transmitter has been programmed.
The LED will respond by turning "Off", indicating that it has exited programming mode.
The LED will respond by turning "Off", indicating that it has exited programming mode.
The LED will respond by turning "Off", indicating that it has exited programming mode.
Important: Once the system has exited Programming Mode, turn the ignition key to the
Important: Once the system has exited Programming Mode, turn the ignition key to the
Important: Once the system has exited Programming Mode, turn the ignition key to the
"Off" position and test transmitter.
"Off" position and test transmitter.
"Off" position and test transmitter.
PROGRAMING - Entering Program Mode
This system is capable of multiple programmable functions.
This system is capable of multiple programmable functions.
This system is capable of multiple programmable functions.
To Enter Program Mode:
To Enter Program Mode:
To Enter Program Mode:
1. Open the hood.
1. Open the hood.
1. Open the hood.
2. Turn the Ignition Key "On/Off", "On/Off", "On".
2. Turn the Ignition Key "On/Off", "On/Off", "On".
2. Turn the Ignition Key "On/Off", "On/Off", "On".
3. Press & Release the button on the antenna once.
3. Press & Release the button on the antenna once.
3. Press & Release the button on the antenna once.
The system will respond with one siren/horn chirp and light flash to confirm it is in Program
The system will respond with one siren/horn chirp and light flash to confirm it is in Program
The system will respond with one siren/horn chirp and light flash to confirm it is in Program
Mode and is ready for Feature Programming.
Mode and is ready for Feature Programming.
Mode and is ready for Feature Programming.
Note: Upon entering Program Mode you can change as many Modes as you like as long
Note: Upon entering Program Mode you can change as many Modes as you like as long
Note: Upon entering Program Mode you can change as many Modes as you like as long
as you don't pause for more than 10 seconds between button presses or turn the ignition
as you don't pause for more than 10 seconds between button presses or turn the ignition
as you don't pause for more than 10 seconds between button presses or turn the ignition
being turned "Off"
being turned "Off"
being turned "Off"
To Exit Program Mode
To Exit Program Mode
To Exit Program Mode
The system will exit Program Mode automatically for the following conditions:
The system will exit Program Mode automatically for the following conditions:
The system will exit Program Mode automatically for the following conditions:
1. The ignition is turned "Off".
1. The ignition is turned "Off".
1. The ignition is turned "Off".
2. No new feature has been programmed within 10 seconds.
2. No new feature has been programmed within 10 seconds.
2. No new feature has been programmed within 10 seconds.
2500 Series Only
2500 Series Only
Advertisement
Table of Contents
