SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________ Copyright 1995 Windsor Industries, Printed in USA YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ For the name and address of your dealer contact: Windsor Industries Phone Number: _________________________________________________________________________________________ M1500 98334 06/29/99...
TABLE OF CONTENTS Machine Data Log/Overview......2 Table of Contents.........3 HOW TO USE THIS MANUAL How to use this Manual........4 SAFETY Important Safety Instructions......5 Hazard Intensity Level........6 Grounding instructions.........7 OPERATIONS Machine Operation........8 MAINTENANCE Daily Maintenance........8 Pad Installation..........8 Troubleshooting.
They are Parts may be ordered from authorized Windsor listed in this general order: dealers. When placing an order for parts, the machine model and machine serial number are Daily Maintenance important.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. WARNING: To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual.
Unless Operation Guide is Read and understood. In Flammable or Explosive areas. In areas with possible falling objects. WHEN SERVICING MACHINE: Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use Windsor approved replacement parts. M1500 98334 06/29/99...
GROUNDING INSTRUCTIONS ELECTRICAL: This high-speed burnisher is designed to operate on a standard 15 amp, 115 volt, 60 hz, AC household current. Check that the voltage shown on the serial number plate is suitable for the supply available. Voltages below 105 volts or above 125 volts could cause damage to the motor.
OPERATION & MAINTENANCE OPERATION DAILY MAINTENANCE CAUTION: For indoor use only. (At the end of each working day.) When using the machine, always keep the 1. Inspect power cord for wear. To prevent machine moving when in contact with the floor. electrical shock replace cords with frayed or cracked insulation immediately.
TROUBLESHOOTING & WIRING DIAGRAM TROUBLESHOOTING PROBLEM. CAUSE SOLUTION Dead electrical circuit No power to machine Check building circuit. breaker of fuse box. Power switch failure. Test switch for continuity and replace if necessary. Faulty circuit breaker. Replace. Faulty power cord. Replace.
If proof of purchase cannot be identified, the warranty start date is 90 days after date of sale to an authorized Windsor distributor. Parts replaced or repaired under warranty are guaranteed for the remainder of the original warranty period.