Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
ITEM
Construction
Motor
Transmission
Pad speed
Electrical system
Cable
Switches
Pad Holder
Wheels
Handle
Dimensions (L x W x H)
Pad size (See note)
NOTE: Always use a pad which has been designed for electric ultra high speed burnishing of at least
2000 rpm.
The sound pressure level at the operator's ear was measured to be 70 dBA. This was a nearfield,
broad-band measurement taken in a typical industrial environment on a tile floor. This appliance
contains no possible source of impact noise. The instantaneous sound pressure level is below 63 Pa.
3-1
MB2000I 980071 11/15/02
DIMENSION/CAPACITY
Heavy-duty die cast aluminum deck
with heavy-duty rubber bumper,
tubular steel self adjusting handle
with die cast aluminum handle
housing.
1.75 hp
Direct drive from motor shaft.
2000 rpm
230 volts, 50Hz
75' [22.9 m], 1.5mm/3 built in cord
wrap.
Dual levers with safety lock.
∅20" [50.8 cm] flexible disc
Four ∅5" [∅12.7 cm], 1.25" [3.2 cm]
wide, non-marking tread.
∅1.5" [∅3.8 cm] tubular steel, self
adjusting handle consistently
maintains full contact with the floor,
and easy to use thumb activated
safety lock.
32" [81.3 cm] X 23.9" [60.2 cm] X
48.4" [122.9 cm]
20" diameter x 1" thick
Advertisement
Table of Contents
