Chapter 5. Configuration Menu
Network (NI)
Interface
Framing
42
This menu is used to access the configuration of parameters
associated with the network interface in the ESU LT. There
are seven submenu items that include setting the framing
type, the line code, and the clock source. See Figure 5-2.
The fields and parameters available are listed in the
following sections.
Selects either the 120Ω DB-15 interface or the 75Ω BNC
interface. The DB-15 to BNC adapter must be used for 75Ω
operation.
Choices: 120Ω BAL; 75Ω BAL; 75Ω UNBAL
In 75Ω UNBAL mode, both Tx and Rx are shield grounded.
The ESU LT can operate in three different framing modes:
Common Channel Signaling (CCS), Channel Associated
Signaling (CAS), or U
ESU LT User Manual
Figure 5-2. Network Submenu
.
NFRAMED
61200410L1-1B