Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make
sure that any problem you find is corrected.
A pre-ride inspection is a must, not only for
safety, but because having a breakdown, or
even a flat tire, can be a major
inconvenience.
Check the following items before you get
on your vehicle:
●
Tire tread wear and air pressures are
within limits.
P. 164
2
●
Lights, horn, and turn signals operate
normally.
Check the following items if you are
carrying a passenger or cargo:
●
Combined weight is within load limits.
P. 244, 246
2
●
Cargo is secured properly.
●
Suspension is adjusted to suit load.
P. 181, 182
2
Check the following items after you get on
your vehicle:
●
Throttle action moves smoothly without
binding.
P. 179
2
●
Brake lever and pedal operate normally.
●
Check the fuel level and refuel when
needed.
P. 15, 141
2
●
Engine stop switch functions properly.
P. 48
2
Check the following items at regular
intervals:
●
Oil level is between the upper and lower
level marks.
P. 171
2
●
Brake fluid level is
Front: above the LWR mark.
Rear: above the LWR mark.
●
Clutch fluid level is above the
GL1800/B
LWR mark.
P. 178
2
●
Engine coolant level is between the
UPPER and LOWER level marks.
●
Side stand functions properly.
●
Parking brake works
GL1800BD/D/DA
properly.
P. 176
2
P. 174
2
P. 174
2
P. 172
2
P. 177
2
157