Color Adjustment; To Select The Display Mode (Color Mode) - Eizo ColorEdge CG243W User Manual

-. Color Adjustment

●

To select the display mode (Color Mode)

Color Mode allows you to select easily the adequate mode suitable for the monitor's application.
Color Mode
Mode
1-Custom
2-sRGB
3-EBU
4-REC709
5-SMPTE-C
6-DCI
7-CAL1
8-CAL2
9-CAL3
Attention
"CAL" mode can be adjusted only by Calibration Software "ColorNavigator".
•
• With default settings only one CAL mode can be selected for every input signal displayed.
• A CAL mode will be chosen by the ColorNavigator in accordance with the displayed input signal.
• Avoid operating any funciton of the monitor while using ColorNavigator.
Procedure
1.
Press
Mode menu appears at the lower left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the current mode with
→Custom←→sRGB←→EBU←→REC709←→SMPTE-C←→DCI←→CAL1←→CAL2←→CAL3←
NOTE
The Adjustment menu and the Mode menu cannot be displayed at the same time.
•
You can disable a specific mode to be selected. For more information, refer to "3-1 Enabling/Disabling Mode
•
Selection" (page
Chapter 2 Adjusting Screen
18
Available for the color settings according to your preference.
Suitable for color matching with sRGB compatible peripherals.
Suitable for reproducing the color gamut and gamma as set forth by EBU (European
Broadcasting Union) standards.
Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec.
709 standard.
Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C stan-
dards.
Suitable for reproducing the color gamut and gamma as set forth by DCI standards.
Displays the screen adjusted by calibration software.
The mode menu
appears.
.
25).
Purpose
is pressed.
or
while the mode menu is being displayed.