4
Perform advanced adjustments for the following using the <Screen> menu of
the <Analog Adjustment>.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars [Clock]
Procedure
1.
Choose <Clock> from the <Analog Adjustment> menu, and press
2.
Adjust the clock with
Press
3.
Press
When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering
or blurring.
●
Remove flickering or blurring [Phase]
Procedure
1.
Choose <Phase> from the <Analog Adjustment> menu, and press
2.
Adjust the phase with
3.
Press
Attention
•
Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct screen position [Hor.Position] [Ver.Position]
NOTE
Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to
•
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1.
Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press
2.
Adjust the position with
3.
Press
Chapter 2 Adjusting Screen
16
or
.
slowly so as not to miss the adjustment point.
to exit the adjustment.
or
.
to exit the adjustment.
or
.
to exit the adjustment.
.
.
.