Operation Check For Authentication Device; Available Reading Method For Authentication Information - Epson WF-C879R Series Setup And Administration Manual

Setup & Administration Guide
6. Use the clamp to gather up the cable.

Operation Check for Authentication device

The following procedures explain how to check the connection status and authentication card recognition for the
authentication device.
❏ Printer's control panel
Information is displayed if you select Settings > Authentication Device Status.
❏ Configuration Status Sheet
Status is displayed in Hardware Configuration > Hardware > Card Reader Status.
See the manual provided with the printer how to print a Configuration Status Sheet.
Available Reading Method for Authentication
Information
You can set the following reading method for the authentication device.
You can set it to the printer using Web Config or Epson Device Admin.
The settings are required in the following cases.
❏ Read the particular area of the authentication card, such as employee number and personal ID.
❏ Use the authentication card information except for UID (authentication card information such as serial
number.)
You can generate the operational parameter by using a tool. Ask your dealer for details.
Note:
Using authentication cards from different manufacturers:
When using UID for card information (card ID information such as the serial number), you can use a mix of different types
of authentication cards. This cannot be mixed when using other card information.
Authentication Device Connection
23