Registration For The User Information (Configuraiton Template) - Epson WF-C879R Series Setup And Administration Manual

Setup & Administration Guide
Item
Authentication Card ID Attribute
ID Number Attribute
Department Attribute
Email Address Attribute
Save To Attribute
Related Information
"Synchronization with the LDAP Server (Web Config)" on page 44
&
"Importing from the LDAP Server" on page 73
&

Registration for the User Information (Configuraiton Template)

Register the user information that is used to user authentication.
When you select LDAP for Authentication Method, you do not need to register the users.
Import for the User Information (Configuration Template)
You can import user information to the printer in bulk by using the LDAP server or CSV/ENE file.
Search the user information from the LDAP server for Epson Print Admin Serverless, and then import it to the
printer.
You can import user information up to the number of users that have not already been assigned in Contacts.
Note:
ENE file is the binary file provided by Epson that encrypts and saves the Contacts or user information. It can be exported
from Epson Device Admin and a password can be set. It is useful when you want to import the user information from the
backup file.
Importing from CSV / ENE File
1. Select Epson Open Platform Settings > Epson Print Admin Serverless Settings > User Settings.
Information Registration and System Configuration
Settings and Explanation
Specify the attribute name to display as the authentication card ID. Enter between
0 and 255 characters in ASCII. The first character should be a-z or A-Z. You can
leave this blank.
Example: cn, sn
Specify the attribute name to display when searching for the ID number. Enter
between 1 and 255 characters in ASCII. The first character should be a-z or A-Z.
Example: cn, id
Specify the attribute name to display as the department name. Enter between 0
and 255 characters in ASCII. The first character should be a-z or A-Z. You can leave
this blank.
Example: ou, ou-cl
Specify the attribute name to display when searching for email addresses. Enter
between 1 and 255 characters in ASCII. The first character should be a-z or A-Z.
Example: mail
Specify the attribute name used to refer to the save destination for Scan To My
Folder. Enter 0 to 255 characters in ASCII.
Example: homeDirectory
71