Epson WF-C879R Series Setup And Administration Manual page 80

Setup & Administration Guide
Items of Customize One-touch Functions
Items
Customize One-touch Functions
Screen size
Maximum functions per screen
Function Assignment
Screen(s)
Making Pull Printing Settings (Configuration Template)
You can make settings to print from any printer by linking to the printer using Epson Print Admin Serverless.
You can register up to four slave printers for a master printer that sends print data from the user's computer.
Important:
c
The following environment is necessary for linked printers.
❏ Epson Print Admin Serverless is available.
❏ Pull Printing is supported.
❏ Epson Print Admin Serverless settings are set to the same values.
Linking the Printer (Configuration Template)
1. Select Epson Open Platform Settings > Epson Print Admin Serverless Settings > Pull Printing from the
configuration template.
2. Set the linked printer from 1: to 5:.
You can use the Pv4, IPv6, or FQDN format for configuration. You can use the following format for FQDN
(<host name>. <domain name> format).
❏ Host name: You can enter 2 to 63 bytes in US-ASCII numbers, letters, and hyphens (except leading and
trailing).
Information Registration and System Configuration
Select Enable / Disable for editing the home screen function.
Select the screen size for the specified device.
Select the maximum number of functions displayed on one screen.
Select the functions you want to assign to the numbers on the screen.
Select the number of screens.
Description
80