Table of Contents
Advertisement
5.2 Printer Function
1. Connect the printer and computer with a cable.
2. Select the PC interface connected with bar code printer.
USB interface
The default interface setting is USB
interface. If USB interface is
connected with printer, no other
settings need to be changed in the
interface field.
3. Click the "Printer Function" button to setup.
4. The detail functions in the Printer Function Group are listed as below.
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.
Others interface
Function
Description
Calibrate the sensor specified in the Printer
Calibrate Sensor
Setup group media sensor field
Setup the IP address, subnet mask, gateway for
Ethernet Setup
the on board Ethernet
RTC Setup
Synchronize printer Real Time Clock with PC
Initialize the printer and restore the settings to
Factory Default
factory default.
Reset Printer
Reboot printer
Print Test Page
Print a test page
Configuration Page
Print printer configuration
Dump Text
To activate the printer dump mode.
Ignore AUTO.BAS
Ignore the downloaded AUTO.BAS program
Exit Line Mode
Exit line mode.
Password Setup
Set the password to protect the settings
- 29 -
2
1
Advertisement
Table of Contents
