Dump Mode - Wasp WPL206 Series User Manual

4.2.2 Dump mode

Printer will enter dump mode after printing printer configuration. In the dump mode, all characters will
be printed in 2 columns as following. The left side characters are received from your system and right
side data are the corresponding hexadecimal value of the characters. It allows users or engineers to
verify and debug the program.
ASCII Data
Note:
1. Dump mode requires 4" wide paper width.
2. Turn off / on the power or press FEED button to resume printer for normal printing. (Ready
mode)
- 24 -
Hex decimal data related to left
column of ASCII data