Denon AVR-X2700H Owner's Manual page 22

Contents Connections
q w e r
A Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 65)
A Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B Turn clockwise until the antennas is fully connected.
C Rotate the antenna upwards for best reception.
q
Front panel Display
Playback
q
w e
Rear panel
Settings
B SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 60)
C RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
D Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
"Connection 2 : TV equipped with an HDMI connector and
0
incompatible with the ARC (Audio Return Channel) / eARC
(Enhanced Audio Return Channel)" (v p. 53)
"Connection 3 : TV equipped without an HDMI
0
connector" (v p. 54)
"Connecting a set-top box (Satellite tuner/cable TV)" (v p. 56)
0
22
Remote
Tips Appendix
Index