Denon AVR-X2700H Owner's Manual page 194

Contents Connections
Setting to assign the unit's built-in power
ZONE2
amplifier for ZONE2 and output the audio
(Default):
in stereo.
Setting to use the front speakers via the
Bi-Amp:
bi-amp connection.
Setting for playback using a second front
speaker. You can switch the playback
between front speaker A and B according
Front B:
to your liking. Switch the front speaker
using "Front Speaker" in the menu.
(v p. 203)
Front panel Display
Playback Settings
Speaker Config.
Select whether or not speakers are present, playback capacity for low
bass frequencies and speaker size.
o Front
Set the front speaker size.
Large
(Default):
Small:
0 When "Subwoofer" is set to "No", "Front" is automatically set to "Large".
0 When "Front" is set to "Small", you cannot set speakers other than "Front" to
"Large".
194
Rear panel
Tips
Use a large speaker that can adequately
play back very low bass frequencies.
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Remote Index
Appendix