Denon AVR-X2700H Owner's Manual page 218

Contents Connections
o Power On Volume
Define the volume setting that is active when the power is turned on.
Last
(Default):
Mute:
1 – 98
(–79 dB – 18 dB):
0 This can be set when "Volume Level" is set to "Variable". (v p. 217)
0 The dB value is displayed when the "Scale" setting is "-79.5 dB - 18.0 dB".
(v p. 159)
o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
-40 dB :
-20 dB :
Front panel Display
Playback
Use the memorized setting from the last
session.
Always mute when power is turned on.
The volume is adjusted to the set level.
The sound is muted entirely.
The sound is attenuated by 40 dB down.
The sound is attenuated by 20 dB down.
Rear panel
Settings
Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2
Set Defaults:
0 Up to 10 characters can be input.
Quick Select Names
Change the quick select name that appears on the TV screen to one you
prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
Set Defaults:
0 Up to 16 characters can be input.
218
Remote
Tips Appendix
The default setting is restored for the edited
zone name.
The default setting is restored for the edited
quick select name.
Index